Home > Antennas / Mounts > Kits > Hood, Channel, Door, Trunk >

FireStik Jeep Hood Channel Mount MK-J4R Kit
FireStik Jeep Hood Channel Mount MK-J4R


 
Price: $27.99

Product Code: MK-J4R
Qty:

Description Specifications
 
This mini-kit was specifically designed for the 1997 and newer Jeep Wranglers. The mounting bracket attaches to the front fender lip under the vehicles hood (either left or right side). Through testing we have found that having the antenna in front of the driver is a better option than the popular bumper type mounts. With the mount in front the driver has constant visual contact with the antenna. There is nothing worse than breaking your antenna in the middle of a trail run because you were unable to see that it was getting into trouble. You've heard it before ... out of sight ... out of mind. We also prefer to have the antenna on the drivers side of the vehicle as most obstructions will be found hanging over the outer edges of the roads or trails.

Drilling Mount HolesInstalled MountComplete Install

Note: The rearward part of the fender on newer Jeeps does not have the same support that was found in earlier models. On these vehicles we recommend that the bracket be mounted at least 8-inches (20cm) forward of the rear edge of the fender where it has sufficient support. If this is not followed, or if the rear part of the fender is not given additional support, the fender, dependent upon the antenna size, will flex from any whipping action of the antenna. See the following for guidance.

Features
  • All of the stainless steel mounting hardware (supplied)is hidden under the hood. The bracket is 2" (51mm) wide by 3" (76mm) long. The kit includes a stainless steel mount, 18 ft (5.5m) of professional grade Fire-Flex coaxial cable, and a FREE microphone hanger. Why buy the mini-kit instead of individual components? The mini-kit uses our exclusive, rugged, weatherproof FireRing coax connection at the mount and costs less than individual component purchasing.